Product Description

Ballistic Specifications,

Harrow Security Vehicles in B6 level are armoured using materials, both opaque and transparent, that meet or exceed the requirements of the European CEN ***2/*3 and CEN ***3 standards to the level FB6 for opaque areas and BR6 for transparent areas. 

Armouring,

All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armour steel and glass defeating 7.*2x*1mm M*0 Nato Ball ammunition (U.S. NIJ level III, CEN level FB6/BR6) and 5.*6x*5 SS**9 ammunition (CEN level FB5/BR5 and FB6/BR6) at 0° incidence (*0° to the surface) and *0m range according to CEN***3 and CEN***2. 

Opaque Areas:

All opaque areas including the roof are protected against the following and all lesser weapons/ ammunitions at *0° impact angle in accordance with the above specifications. 

• Calibre 7.*2 x *9 mm, FJ/PB/FeC, AK *7 Kalashnikov
• Calibre 5.*6 x *5 mm, FJ/PB/SCP, M*6 Colt
• Calibre 7.*2 x *1 mm, FJ/PB/SC, (FN) FAL / LAR NATO rifle  

Transparent Areas:

All transparent areas are multi-layer and polycarbonate coated to protect against the following and all lesser weapons/ ammunitions at *0° impact angle in accordance with the above specifications. 

• Calibre 7.*2 x *9 mm, FJ/PB/FeC, AK *7 Kalashnikov
• Calibre 5.*6 x *5 mm, FJ/PB/SCP, M*6 Colt
• Calibre 7.*2 x *1 mm, FJ/PB/SC, (FN) FAL / LAR NATO rifle  

Floor,

The floor of the vehicle is designed to defeat the following hand grenades 

• Two DM *1 (German Norm) detonated simultaneously  

In addition, the floor also offers protection against anti-personnel mines. 

Armouring design: 

• The armouring is integrated inside the vehicles cab and forms a complete self-supporting structure so as to avoid excessive stress on the vehicles original structure.
• The interior armour-frame provides overlap for the large-surface armour components such as the door armour-plates and the windows.
• Hinge mounting points are reinforced both in the pillars and in the doors in a way that the armouring of the door is supported by the armouring of the pillar.
• Heavy-duty hinges with in-built door-stop.
• Fuel-tank(s) protected with steel armour-plates.
• The battery and control module of the engine are protected to the same level as the opaque areas.
• Wind proof passenger cabin

All materials used in the production of the cabin were successfully tested against projectiles and explosives by independent laboratories. Test reports can be presented upon request or during a factory visit. The armouring of the vehicle provides protection against a wide range of projectiles and explosives. However, complete protection is not possible for reasons of design and modern military weapon technology.
 

Vehicle Specifications,
 

Base vehicle:                                      Chevrolet Suburban LS, 4WD, lhd, new 

Engine model:                                    5.3L V8 Vortec petrol with Active Fuel Management 

Output:                                               *@********************